|
|
Steps
Your Car Will Experience During a Car Wash Bath |
Step
#1
Vacuum
The Interior - Pull up under our canopy and leave your car (still
running) to our trained attendants. Our attendants will use our high volume
vacuum system to clear loose debris from your seats, carpet, floor mats
(under too), and cup holders.
Step
#2
The
Prep Bay -This is were your car gets the extra soap treatment for
those troubled areas. We have a wheel & running board blaster which
removes brake dust and dirt from wheels and those hard to reach areas
on the lower sides before entering the HOT WATER WASH.
Step
#3
The
Hot Water Wash - Each vehicle may get the special Soaps, Rinse, Wax
and
Dry agents. We start with soap foamers with extra lubrication to the
soft cloth during the wash cycle. We have a special top brush that is
used for more cleaning action for the top and sides of vehicles to remove
dirt. (Specially designed cloth for larger trucks, vans and SUVs are
used but still work great on cars as well.) The Undercarriage rinse
is a high volume, low pressure rinse to blast away salt and debris from
under side of vehicle. Sealer Wax is a tempered wax solution to help
protect from paint oxidation and the Tri-Form Wax is red, green, and
blue foam which contains ridescent brighteners and wax properties
to enhance color of the paint and the shine. The final step - The Rain
Arch- the final step in vehicle washing used as a drying-aid setter
before the blowers.
Step
#4
Hand
Towel Dry - This is the area we pride ourselves on. We pay special
attention to hand towel drying the outside of your vehicle and we wipe
down the dash, console, steering column, windows, and door jams. Tire dressing is always hand applied to tires with a rim wipe down. |
|
|
